Automatic Rebar Fixing Tools
Reduces rebar fixing time, up to 5 times faster than manual fixing.
Makes a rebar tie in approximately one second with consistant strength.
Easy to operate - Learn to use Rebar Tier in minutes. Reduce risk of health
problems, Ergonomics and reduction in the probability of an injury such
as carpal tunnel injuries. Extension arm Reduces constant bending.
One hand operation allows worker to hold rebar while fixing it.
Battery operated, no electrical cords to trip over or to get tangled.
Battery charges within 25 to 30 minutes. Reinforced Steel Fixing tools
that are currently available are the RB215, RB395, RB515, RB655 and RB700.
With this range of rebar fixing tools a wide range of sizes of
reinforced steel can be fixed quickly and efficiently.
Visit our
Rebar Fixing Overview
page for more information.
Visit our
Automatic Rebar Fixing Tools - Site Photos page to see the wide
range of applications where our automatic rebar fixing tools are being used.
BOlt & NUT PROTECTION CAPS - RADOLID®
RADOLID
® bolt and nut protection caps will protect bolts
and nuts for years from external elements which create deterioration
and corrosion. Protective grease can be applied to the botl or nut before
covering it with a RADOLID
® protective cap. Clipping the
RADOLID
® protective cap on is easy and removing it is just
as easy when inspection is required. Using a RADOLID
®
protection cap will result in huge savings in bolt and nut maintenance cost.
For more information on these cost saving devices visit our
Radolid® Protection Caps
web page.
BRECON ELECTRICAL CONTROL SYSTEMS
Electrical control systems offer you the possibility to directly select which
formwork you want to vibrate and when.They represent an open system, which
comprises the most modern control technology, however older and already
installed vibration equipment can also be integrated into it. The flexibility
of these system are unequalled. For more information visit our
Electrical Control Systems
web page.
BRECON FREQUENCY CONVERTERS
Frequency converters are required for operation of vibrators with 6000
oscillations per minute. In addition to converters with a fixed frequency
of 200 Hz, BRECON also supplies converters with variable output frequency.
These variable converters allow the frequency and thus the centrifugal force
(acceleration) to be adapted to the requirements of the concreting operation
and the respective formwork conditions. For more information visit our
Electrical Control Systems
web page.
CASING END SEALS
RMCSPL End Seals outperform the costly and labour intensive brick and
mortar method of sealing casing ends. While soil stress and pipe movement
cause mortar to crack, the RMCSPL products move with the pipe, insuring the
integrity of the seal. Unlike link-type sealing blocks that are limited
to carrier/casing differential and can only be used on a concentric profile,
the RMCSPL seals are totally flexible. RMCSPL offers four types of end
seals which can accommodate any combination of pipe sizes. Visit our
Casing End Seals web page for
more information.
In addition, Linkseals
® forms a mechanical seal between pipelines and
casing. Linkseals forms a hydrostatic seal and electrically insulate the
carrier pipe from the casing. Linkseals can be installed by one person
and requires no special tools. Visit our
Linkseals® Penetration Seals web page for more information
on this first class product.
CASING SPACERS & CENTRALISERS
RMCS Casing Spacers centre water and sewer pipes in casings with ease
of installation, are virtually corrosion proof and provide insulating
protection from a possible electrical shorting between the carrier
pipe and casing. No special tools are needed, no grease is used
and they are easily bolted on by a single worker. RMCS Casing Spacers
eliminate the need to fill the casing annulus with sand which is
extremely labor intensive. Sand in the annulus also acts as an electrolyte
thereby introducing unwanted current to the steel or ductile iron.
With no need for this fill, RMCS Casing Spacers are your answer to
lower installation costs with continued access for maintenance.
Casing insulators are used to support and electrically insulate a pipeline
from a casing pipe through which it must pass and are used in river
crossings, canal crossings and bridge crossings as well as highway
and railroad crossings. We recommend installation of polyethylene
casing insulators every 1,8 to 2,4 meters. Visit our
Casing Spacers web page for more
information.
REBAR CENTRALISER
RMCS Rebar Centralisers are used to centralize steel reinforcing in the centre of a pile.
These centrailsers provide a cover of 30mm and will accept reber up to a size of
25mm. Visit our
Centraliser web page for more
information.
CONCRETE REBAR CHAIR SPACERS OR CONCRETE COVER BLOCKS
The RMCSPL has a range of concrete rebar chair spacers or cover blocks with Certified strength
to withstand extreme rebar weights or pressure. These concrete rebar chair
spacers come with embedded fixing wire for easy fixing to rebar. They have
a wide base to ensure best support without tipping or falling over and are
quick and easy to install. Visit our
Concrete chair spacers web page for information about concrete cover
sizes and packaging.
These concrete rebar chair spacers or cement cover blocks are made
by casting them into rubber moulds.
CONCRETE WHEEL SPACERS OR CIRCULAR SPACERS
Concrete wheel spacers (Circular spacers) or column cover blocks are used
to ensure consistant concrete cover
for columns and walls inside the concrete shutter. Wheel spacers
help to ensure the centralisation of rebar inside the shutter. The notched
outer rim of the wheel spacers ensure minimum contact with the shutter.
Visit our
Concrete Wheel spacers
web page for information about concrete cover sizes and packaging.
These wheel spacers are made from plastic (polyurethane or polypropylene)
using a plastic injection moulding process.
CORNER FILLETS OR CHAMFERS
Corner fillets or chamfers are used to chamfer corners of cast concrete
such as beams, columns, slabs or pre-cast concrete products. Made from
durable PVC and can be re-used a number of times. View our
Corner Fillets or Chamfers with extension or
Corner Fillets or Chamfers without extension
web pages for more information about sizes and lenghts.
These corner fillets or chamfers are made from plastic (polyurethane or polypropylene)
using a plastic extrusion process.
CONCRETE COVER BLOCKS OR REBAR CHAIR SPACERS
The RMCSPL has a range of concrete cover blocks or rebar chair spacers with Certified strength
to withstand extreme rebar weights or pressure. These concrete rebar chair
spacers come with embedded fixing wire for easy fixing to rebar. They have
a wide base to ensure best support without tipping or falling over and are
quick and easy to install. Visit our
Concrete chair spacers web page for information about concrete cover block
sizes and packaging.
Concrete cover blocks or cement spacers.
DAMP COURSE
Practically all building materials absorb water. This should not and need not be a problem.
In reality water is the single most damaging cause of structural decay. Rising Damp is
responsible for more building maintenance costs than any other cause.
Dry Rot, Wet Rot, Rising, Lateral and Penetrating Dampness along with condensation, all arise
because of unwanted and unnecessary water in buildings. These conditions create the perfect
environment for the growth of fungi and the spread of wood destroying insects.
If treatment is delayed for any reason the damage will be much more than cosmetic. The fabric
of the building will be damaged and its structural integrity threatened to a point where it will
become unsafe. When the external signs become evident - damage has already begun.
There should be no delay in undertaking remedial work. Delay will incur additional risk and cost.
Rising Damp is a very real possibility wherever a wall is in contact with the ground. The soil,
which normally has a high moisture content, acts as a reservoir. The evaporation of water from
the surfaces of the wall exposed to the air cause the fabric of the wall to act as a 'sponge'
drawing moisture up from the ground, through the bricks, stone or mortar. Depending on the
construction and materials of the wall serious damage can occur anywhere up to 1.2 metres above
ground level.
Lack of, or the presence of an ineffective damp course will inevitably lead to Rising Damp and
all the attendant damage that entails. To view pictures of our product and pictures of how to
install damp course, view our
Damp Course web page.
EXTERNAL VIBRATORS FOR THE CONCRETE COMPACTION INDUSTRY
There are 2 methods of compacting concrete via external vibration. Wet-cast
concrete gets consolidated by external vibrators mounted to the outside
of a mould. This reduces the cohesion and friction between the components.
Grains are therefore able to become denser and the enclosed air can move
upward and escapes. Dry-cast concrete achieves compaction through external
vibrators on top. With this method the concrete gets pressed and the
enclosed air of the concrete moves out. Visit our
Concrete Compaction
web page for more information about our External vibration technology.
EXTERNAL VIBRATORS FOR THE CONVEYING INDUSTRY
For applications like conveying, sieving, loosening and breaking-up,
BRECON offer a big range of external vibrators from 500 1/min up to
3.000 1/min. All these vibrators are available in 50Hz and 60Hz mains
frequency and on request special executions (e.g. 500V) are available.
We would be pleased to help you selecting the correct vibrator for your
application. Visit our
External Vibrators for the Conveying Industry web page for
more information.
FERRULE TUBE PUSH-ON CONES
Ferrule tube push-on cones are used as ends
on ferrule tubes to space shutters.
Fits on the inside of the tie-rod sleeve. Can be removed after
the shutters have been dismantled and be used again. Visit our
Ferrule Tube Push-on Cones (End cone)
web page for information about sizes and packaging.
These ferrule tube push on cones are made from plastic (polyurethane or polypropylene)
using a plastic injection moulding process.
FIBRE CONCRETE, FIBRE CEMENT SPACERS OR COVER BLOCKS
RMCS has a range of fibre concrete rebar chair spacers, also referred to as
fibre cement cover blocks, with Certified strength
to withstand extreme rebar weights or pressure. These fibre concrete rebar chair
spacers come with embedded fixing wire for easy fixing to rebar. They have
a wide base to ensure best support without tipping or falling over and are
quick and easy to install. Visit our
Concrete chair spacers web page for information about concrete cover
sizes and packaging.
These fibre concrete rebar chair spacers or fibre cement cover blocks are made
using a concrete extrusion process.
FLUSH CUTTING SAW
The DFC20A Flush Cutting Saw is a new addition to the DIAMOND line of electric tools for the construction industry,
it's a multipurpose cutting tool that can be used on a lot of different materials
found on the job: rebar, all-thread rod, locks, chain, EMT conduit, copper pipe,
steel rods, etc. It is excellent for cutting material flush with concrete. It makes no
sparks and leaves no burrs.
For more information on our Flush Cutting Saw visit our
Flush Cutting Saw web page.
LINKSEALS® Penetration Seals
LINKSEALS
® forms a mechanical seal between pipes going
through walls, floors, vaults, tanks and pipeline casings. Besides being
designed to form a hydrostatic seal of up to 40 PSIG and up to 28,8 meters of
head pressure, LINKSEALS
® helps absorb vibrations, shocks,
and sound waves. Being non-conductive, LINKSEALS
®
electrically insulates the inner carrier pipe from the penetrated
structure. With this being a desired property in many applications
in preventing a shorting effect from stray currents, it is particularly
useful in sealing the gap between electrical conduit and the outer
conduit or between electrical conduit and the opening.
LINKSEALS
® can be installed easily and quickly by one worker
with no special tools required. Visit our
Linkseals® Penetration Seals web page for more information
on this first class product.
INTERNAL AND EXTERNAL VIBRATORS FOR THE CONCRETE INDUSTRY
The RMCSPL range of BRECON internal and external vibrators are suitable for
a wide range of concrete compaction - dry-cast and wet-cast concrete.
Visit our
Vibration Technical Applications for more information about what
Concrete vibration technology is available form RMCSPL.
INTERNAL VIBRATORS FOR THE CONCRETE INDUSTRY
Internal vibrators are well suited for rough applications and a long
service life. Thanks to the optimal power output of the motor the rotation
speed always stays constant, even under extrem load requirements. These
internal vibrators are designed to make servicing them easy.
Visit our
Internal Vibrators
web page for more information about our Internal Concrete vibration
technology.
JOINT BARS ALSO CALLED GROUTING PROFILES
Joint bars or Grouting profiles as they are calles are used to create
features on concrete walls or hide joins. Can be nailed or screwed or nailed
to a shutter. Made from durable PVC and can be re-used a number of times.
View our
Joint bars web page to see the
different sizes that we manufacture.
These joint bars or grouting profiles are made from plastic (polyurethane or polypropylene)
using a plastic extrusion process.
KNIPEX BOLT CUTTERS & CONCRETE MESH CUTTERS
The Knipex range of bolt cutters and concrete mesh cutters have blades made
from high performance Chrome Vanadium steel, oil-hardened and tempered.
Precision cutting edges are additionally induction hardened. To view
the sizes that are available and more technical information, visit our
Knipex Bolt Cutters web page.
KNIPEX CONCRETORS PLIERS
The Knipex Concretors Pliers are the best pliers for rebar fixing on the market today.
They are robust and durable and are the most preferred concretors pliers in
the reinforced steel fixing trade today. The main application for the Knipex
Concretors Pliers is twisting and cutting off tie wire when fixing the rebar.
Visit our
Knipex Concretors Pliers
for more information about this top of the range product.
Knipex concretors pliers together with our
Automatic Rebar Fixing Machines is a must for every contractor
who wants to save many hours on fixing reinforced steel and ultimately on
the project.
MANUAL REBAR CUTTER AND BENDER
This well designed combination machines is a must for every site. It will
save a contractor time and money and pay for itself many time over. Our
manual rebar cutter/bender is designed for cutting and bending reinforced
steel (Rebar). Its blades are made from drop-forged high grade alloy tool
steel and heat-treated to last. Cuts rebar safely, cleanly and efficiently
with minimal effort. Bends rebar up to 180 degrees with versatile operation.
Cutting and bending head can be bought and replaced separately. For more
information about this unique and cost effective tool for cutting and
bending rebar visit the RMCSPL
Manual Rebar Cutters/Benders web page.
PERMANENT CONES
Ferrule tube permanent cones could be used as a substitute for ferrule tube
end cones (push-on cones). They remain in the concrete after the shutter has
been removed and are plugged with a matching cap to ensure a clean and neat
finish of the concrete casting. They save time and money because labourers
won't have to patch up unsightly holes left as a result of tie rod holes.
Visit our
Ferrule Tube Permanent Cones
web page for information about sizes and packaging.
These ferrule tube permanent cones are made from plastic (polyurethane or polypropylene)
using a plastic injection moulding process.
PORTABLE COMBINATION REBAR CUTTERS AND BENDERS
DIAMOND portable combination rebar cutters and benders come with a more 25
year proven track record and reliability for on site reinforced steel
cutting and bending. They are the best quality portable, single
phase combination rebar cutting and bending machines on the market today.
Contractors like their portability, reliability and the ability run on 220
volt single phase power. Contractors using these portable rebar cutting
and bending machines soon find out that these tools are invaluable.
DIAMOND portable rebar cutters and benders are faster and safer to use
than jigs or any other manual bending methods. Manual bending methods
take at least ten to twenty times longer than our machines and are not
as consistant. The models available are the DBC-16H and DBC-25X. Visit
our
Portable Combination
Cutters/Benders web page for information on these high quality cost
saving machines.
PORTABLE REBAR BENDERS
The RMCSPL range of electric portable rebar benders have a proven track
record of over 25 years. They are the most reliable and of the very best
quality portable electric rebar benders on the market today.
Contractors like their portability, reliability and the ability run on 220
volt single phase power. Contractors using these portable rebar bending
machines soon find out how invaluable these tools are. Made by IKK-DIAMOND
in Japan, these portable rebar benders are faster and safer to use than
jigs or any other manual bending methods. Our DBD-16L will bend 16mm rebar
180 degrees in just 1.5 seconds. Manual bending methods take at least ten
to twenty times longer and are not as consistant. Our robust and reliable
heavy duty, DBD-25H bender can be used on site or as production machine.
We also stock the DBR-32WH and DBD-32X rebar benders. Visit our
Portable Rebar Benders
web page for more information about these high quality cost saving machines.
PORTABLE REBAR CUTTERS
The RMCSPL range of electo hydraulic portable rebar cutters have a proven
track record of over 25 years. They are the most duarable, reliable and
of the highest quality of all the portable electo hydraulic rebar cutters
on the market today. Contractors like their portability, reliability and
the ability run on 220 volt single phase power. Contractors using these portable rebar bending
rebar cutting machines soon find out how invaluable they are. Made by IKK-DIAMOND
in Japan, the rebar cutters are faster, safer and more economical to use
than abrasive blade cutters or an oxygen/acetylene cutting torch. Abrasive
blades or cutting torches take at least twice the time that it takes a
DIAMOND rebar cutter to cut any size of reinforced steel.A set of
cutting blocks can cut through 4,000 to 8,000 pieces of rebar before thay
need to be replaced. We stock and supply the DC-16LZ, DC-16W, DC-20WH,
DC-20W, DC-20HL, DC-25W and DC-32WH 220 volt rebar cutters and the DC-1618
battery operated rebar cutter. Visit our
Portable Rebar Cutters web page for more information about these high
quality cost saving machines.
PORTABLE STEEL PUNCHES
Our unique portable steel punches will quickly and conveniently punch
through Flat Bar and save you a lot of time and money!!!! Made by
IKK-DIAMOND in Japan these handy puncher's fast punching action produce
burr-free holes in a less than a tenth of the time that it will take you
to drill any hole. The DIAMOND handy puncher can produce round and
elliptical holes in a fraction of the time required by conventional methods.
The models which are available are the EP-1406V, EP-1475V, EP-19V, EP-20S
and EP-2110V. For more on this unique and handy product visit the RMCSPL
Overview of Punches web page.
REBAR CHAIR SPACERS OR COVER BLOCKS
Rebar Chair spacers or cover blocks are used to support rebar on a deck, which includes
radial grounding, heavy duty rebar laying and beams. The wide base of these
rebar chair spacers or cover blocks prevent the chairs from tipping over. The design ensures
freeflow of concrete and minimal contact with the concrete formwork.
Visit our
Chair spacers web page
for concrete cover sizes and packaging.
These rebar chair spacers or cover blocks are made from plastic (polyurethane or polypropylene)
using a plastic injection moulding process.
REBAR CLIPS
Rebar clips are similar to rebar chair spacers and are used to support rebar
or mesh on a deck, which includes radial grounding, heavy duty rebar laying
and beams. The wide base of these rebar clips prevent the clips from
tipping over. The design ensures freeflow of concrete and minimal contact
with the concrete formwork. Visit our
Rebar clips
web page for concrete cover sizes and packaging.
These rebar clips are made from plastic (polyurethane or polypropylene)
using a plastic injection moulding process.
REBAR SAFETY CAPS OR REBAR END CAPS
Our Rebar Safety Caps can be used to protect construction workers from the
danger of being pierced by pertrudung rebar. Rebar sticking out from pillars
or colums on a slab present the real danger of piercing workers who may
trip and fall on site. Rebar sticking out from the sides of slabs could
cause workers to loose an eye. The minimal cost of using rebar safety caps
on a construction site is insignificant compared to lost man hours that may
result from injuries. Using our rebar safety caps is a small price to pay
for the safety of workers on site. Visit our
Rebar Safety Caps
web page for sizes and packaging.
These rebar safety caps or end caps are made from plastic (polyurethane or polypropylene)
using a plastic injection moulding process.
RECKLI FORMLINERS AND ACCESSORIES
Reckli formliner are the easiest and most convenient way in which to give
character to precast or in-situ concrete. A more environmental freindly
landscape can be created by turning old fashioned and bland concrete blocks
into eye pleasing structures. Standard formliners can be purchaed or your
own unique patterns can be created by using our Reckli DIY products. A photo
can also be converted to a formliner and precast for permanance.
To see our catalog with and extended range of formaliners Visit our
Formliners web page, to
see how to create your own unique formliners visit our
DIY Formliners web page,
To see how a photograph can be turned into a concrete landmark, visit our
Photo Engraving Formliners
web page and to find out what accessories we have availaable, visit our
Reckli Accessories web page.
RUBBLE CHUTES
Rubbish chutes or Rubble Chutes are the perfect way to remove rubble or household waste safely
from multi-storied buildings to the rubble dump or waste container. Visit our
Rubble Chutes /
Rubbish Chutes
web page for more information about this "Safe Site" product.
Swivel Clamps
Swivel clamps / Swivel Couplers ae used to connect scaffold tubes at any angle.
Our swivel clamps / swivel couplers are made of forged steel and are galvanised.
For more information visit our
Swivel Clamps web
page.
TIE-ROD PROTECTION PIPE HEADS OR FERRULE CONES
Tie-rod protection pipe heads or ferrule end cones are used as ends
on tie-rod sleeves (ferrule tubes) to space shutters.
Fits on the inside of the tie-rod sleeve. Can be removed after
the shutters have been dismantled and be used again. Visit our
Tie-rod Pipe Head
web page for information about sizes and packaging.
These Tie-rod protection pipe heads or ferrule cones are made from plastic (polyurethane or polypropylene)
using a plastic injection moulding process.
TIE-ROD SLEEVES OR FERRULE TUBES
Tie-rod sleeves or Ferrule Tubes are used to space shutters and
to recover expensive concrete shutter tie-rods (through ties).
The inside diameter of the tie-rod sleeve (ferrule tube) needs
to be at leat 1mm greater than that of the tie-rod (through tie)
being used to fix the shutter. Visit our
Tie Rod Sleeves
web page for information about sizes and lenghts.
These joint bars or grouting profiles are made from plastic (polyurethane or polypropylene)
using a plastic extrusion process.
These Tie-rod sleeves or Ferrule Tubes are made from plastic (polyurethane or polypropylene)
using a plastic extrusion process.
TRIANGULAR CHAMFER WITH SLOTTED LIP - PLASTI-CORNER
Chamfers or Corner fillets are used
to chamfer the corners of cast concrete such as beams, columns, slabs or
pre-cast concrete products. Our most modern technological mabufacturing
process ensures a perfect fit to your shutter. The highest quality materials
are used to give you a number one product that can be used a number
of times. No more battles to try to fit your slotted chamfer to you
shutter!! Visit our
Chamfers with slotted lip web page to see what sizes we have available
for you.
These Chamfers, also called Corner fillets or plasti corners are made from
plastic (polyurethane or polypropylene) using a plastic extrusion process.
WALL SLEEVES
Protect your investment and use RMCS wall sleeves to provide a better seal than
a core drilled hole. In the absence of wall sleeves, mechanical/utility piping
vibration can cause costly wall damage. In addition, wall sleeves make it easy
to repair piping without damaging the wall. For more information about this
products visit our
Wall Sleeves web page.
Water Stopper
Water Stopper / Water Stops are used in concrete masonry construction of hydraulic
structure to safeguard from hydrostatic pressure and water seepage.
Our Water Stopper / Water Stops are made from malleable Casting and
has a safe working load of 90 KN.
Threading is suitable for 15/17mm tie rod and comes with 2 plastic adoptors.
For more information about our water stoppers visit our
Water Stopper web page.